home *** CD-ROM | disk | FTP | other *** search
/ Mac Easy 2010 May / Mac Life Ubuntu.iso / casper / filesystem.squashfs / usr / src / linux-headers-2.6.28-15 / drivers / net / wireless / b43 / Kconfig next >
Encoding:
Text File  |  2008-12-24  |  3.6 KB  |  127 lines

  1. config B43
  2.     tristate "Broadcom 43xx wireless support (mac80211 stack)"
  3.     depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
  4.     select SSB
  5.     select FW_LOADER
  6.     select HW_RANDOM
  7.     ---help---
  8.       b43 is a driver for the Broadcom 43xx series wireless devices.
  9.  
  10.       Check "lspci" for something like
  11.       "Broadcom Corporation BCM43XX 802.11 Wireless LAN Controller"
  12.       to determine whether you own such a device.
  13.  
  14.       This driver supports the new BCM43xx IEEE 802.11G devices, but not
  15.       the old IEEE 802.11B devices. Old devices are supported by
  16.       the b43legacy driver.
  17.       Note that this has nothing to do with the standard that your AccessPoint
  18.       supports (A, B, G or a combination).
  19.       IEEE 802.11G devices can talk to IEEE 802.11B AccessPoints.
  20.  
  21.       It is safe to include both b43 and b43legacy as the underlying glue
  22.       layer will automatically load the correct version for your device.
  23.  
  24.       This driver uses V4 firmware, which must be installed separately using
  25.       b43-fwcutter.
  26.  
  27.       This driver can be built as a module (recommended) that will be called "b43".
  28.       If unsure, say M.
  29.  
  30. # Auto-select SSB PCI-HOST support, if possible
  31. config B43_PCI_AUTOSELECT
  32.     bool
  33.     depends on B43 && SSB_PCIHOST_POSSIBLE
  34.     select SSB_PCIHOST
  35.     select SSB_B43_PCI_BRIDGE
  36.     default y
  37.  
  38. # Auto-select SSB PCICORE driver, if possible
  39. config B43_PCICORE_AUTOSELECT
  40.     bool
  41.     depends on B43 && SSB_DRIVER_PCICORE_POSSIBLE
  42.     select SSB_DRIVER_PCICORE
  43.     default y
  44.  
  45. config B43_PCMCIA
  46.     bool "Broadcom 43xx PCMCIA device support (EXPERIMENTAL)"
  47.     depends on B43 && SSB_PCMCIAHOST_POSSIBLE && EXPERIMENTAL
  48.     select SSB_PCMCIAHOST
  49.     ---help---
  50.       Broadcom 43xx PCMCIA device support.
  51.  
  52.       Support for 16bit PCMCIA devices.
  53.       Please note that most PC-CARD devices are _NOT_ 16bit PCMCIA
  54.       devices, but 32bit CardBUS devices. CardBUS devices are supported
  55.       out of the box by b43.
  56.  
  57.       With this config option you can drive b43 cards in
  58.       CompactFlash formfactor in a PCMCIA adaptor.
  59.       CF b43 cards can sometimes be found in handheld PCs.
  60.  
  61.       It's safe to select Y here, even if you don't have a B43 PCMCIA device.
  62.  
  63.       If unsure, say N.
  64.  
  65. # Data transfers to the device via PIO
  66. # This is only needed on PCMCIA devices. All others can do DMA properly.
  67. config B43_PIO
  68.     bool
  69.     depends on B43 && (B43_PCMCIA || B43_FORCE_PIO)
  70.     select SSB_BLOCKIO
  71.     default y
  72.  
  73. config B43_NPHY
  74.     bool "Pre IEEE 802.11n support (BROKEN)"
  75.     depends on B43 && EXPERIMENTAL && BROKEN
  76.     ---help---
  77.       Support for the IEEE 802.11n draft.
  78.  
  79.       THIS IS BROKEN AND DOES NOT WORK YET.
  80.  
  81.       SAY N.
  82.  
  83. config B43_PHY_LP
  84.     bool "IEEE 802.11g LP-PHY support (BROKEN)"
  85.     depends on B43 && EXPERIMENTAL && BROKEN
  86.     ---help---
  87.       Support for the LP-PHY.
  88.       The LP-PHY is an IEEE 802.11g based PHY built into some notebooks
  89.       and embedded devices.
  90.  
  91.       THIS IS BROKEN AND DOES NOT WORK YET.
  92.  
  93.       SAY N.
  94.  
  95. # This config option automatically enables b43 LEDS support,
  96. # if it's possible.
  97. config B43_LEDS
  98.     bool
  99.     depends on B43 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43)
  100.     default y
  101.  
  102. # This config option automatically enables b43 RFKILL support,
  103. # if it's possible.
  104. config B43_RFKILL
  105.     bool
  106.     depends on B43 && (RFKILL = y || RFKILL = B43) && RFKILL_INPUT && (INPUT_POLLDEV = y || INPUT_POLLDEV = B43)
  107.     default y
  108.  
  109. config B43_DEBUG
  110.     bool "Broadcom 43xx debugging"
  111.     depends on B43
  112.     ---help---
  113.       Broadcom 43xx debugging messages.
  114.  
  115.       Say Y, if you want to find out why the driver does not
  116.       work for you.
  117.  
  118. config B43_FORCE_PIO
  119.     bool "Force usage of PIO instead of DMA"
  120.     depends on B43 && B43_DEBUG
  121.     ---help---
  122.       This will disable DMA and always enable PIO instead.
  123.  
  124.       Say N!
  125.       This is only for debugging the PIO engine code. You do
  126.       _NOT_ want to enable this.
  127.